Oh ! You found the finished knitting crinkled, rolled, clumsy! Don’t open up the design nicely! So, no tension! Just learn how to block knitting. It’s nice and easy! When you want to make your knitting get ready, lucrative, soft, and stretching yarn and finalized for the market, you need to know the process of how to block knitting.
Block knitting is the process of making your product more lucrative to the customer and also make the knitting more soft, smooth, and attractive.
Actually, block knitting needs the product when you make it by hand. It deserves more when you are a beginner knitter to make the knitting look good and stretching the fiber. If you are a beginner in knitting, you have to know about how to block knitting.
What is Block Knitting
Block Knitting is the process of your final pieces to set for a finished size and lucrative look by using some techniques like wetting or steaming. Flat surface and fully dry needs to set the piece in proper shape and size.
Various methods used to make your piece in appropriate shape and size. You can use wet blocking, steam blocking, and dry blocking, shape blokker.
How to Wet Blocking
At first, you have to soak the pieces in a gentle and friendly way for 20-30 minutes in a bowl. You can use fabric wash liquid to make the yarn soft. Make sure that it soaks deeply and accurately. Wet blocking makes the fiver more relaxed.
After soaking the knitting, put out the sample, and gently press the water out. Make sure that the piece is not rubbing in a rough of fear of displacing the knitting. Then roll it in a thirsty towel to drain water as much as you can.
While soaking the knitting, you make a flat surface for laying your dump knitting. Then, according to your requirement, put the knitting in the flat surface under a dry towel and pinned it with the T-pin.
Finally, place it in a dry place in the sunlight or ventilated area.
How to Steam Blocking
At first, lay your knitting on a clean and thirsty towel on a flat surface or a blocking board. Then put a full wet towel or cloth on the knitting and place it in the proper shape. Use a hot iron on the fiber to set it on a very actual structure according to your demand.
You can use the measurement tape to get the appropriate shape. Press the hot iron on the wet cloths a few seconds. Repeat it until it gets proper shape. Make sure the steam is going into the piece. Then remove the towel, and you get a relaxed and smooth fiber.
How to Dry Blocking
Lay your knitting on a flat surface of a dry towel or a block board. Pin the fiber with T-pin according to your measurement tape. Then spray cold water on the knitting at room temperature and pull it according to its shape and finally let it into the room air.
How to Shape by Blokker
It’s the easiest way to shape your knitting. If you think that you don’t have sufficient time to spend on it, then you can buy a blocking board from the store and perfectly shape the knitting.
When it’s time to learn how to block knitting, you also gain the blocking tools. Various tools are used for blocking the knitting like a blocking board, T-pin, blokker for shape, wire, towel(wet and dry), liquid wash, iron measurement tape.
Why You Block Knitting?
- Blocking relaxes the yarn and makes it easy for stitching correctly.
- Complicated patterns may not highlight their design without blocking.
- The design is visible through the blocking.
- Blocking reduces the curling of the edges of the knitting and flattens the edges.
- Access color can wash away by a deep soaking of the knitting and avoids the mixing up with other cloth.
- Blocking can help to get a smooth, precise, and finished design.
Tips for Block Knitting
- After soaking the knitting, please do not rub it roughly. Drain the moisture gently and nicely by using a dry towel.
- Do not high heat the iron without the wet towel.
- Do not twist the knitted while draining the water. It misshapes the design.
- You might use wash liquid to get a shiny and smooth knitted.
- If the color bleeding of the knitting is high, you can use vinegar and soak to stop it.
- Avoid over-blocking to get a natural bounce look. Because some yarn has a natural bounce look.
Do I Blocking for Every Yarn?
- The blocking gives the best feedback to the natural fiber of wool and alpaca. You soak the total fiber and remove it out of water.
- Silk is very sensitive in the heat method. So avoid it.Cashmere and acrylic are recommended for the dry block that seems to spray cold water on the yarn.
Blocking is the most excellent way to represent the knitting to the people in a commercial way. These fundamental processes make you learn how to block knitting. So keep happy knitting and enjoy it.
You can also check the…